Light and Life Park
Gate Operating Procedures
Residents with a gate opener entering the Park
1. Drive slowly over the speed bump and stop one to two car lengths from
the gate.
2. Point the opener at the gate and press the button.
3. Gate should open.
4. Proceed through the gate.
Note: The gates close automatically when the vehicle
clears the gate area
Exiting the Park
1. Drive slowly, keeping to the right, until you clear the speed bump.
2. Stop.
3. The gate will open automatically.
4. DO NOT PROCEED UNTIL THE GATE IS FULLY OPEN.
Note: The gates close automatically when the vehicle
clears the gate area
Visitors entering the Park
1. Stop at the call box on the left side of the road.
A. If you know the code for the resident, enter it by using the keypad.
B. If you do not know the code, scroll to the name of the resident, by
tapping either the A or Z button. DO NOT hold the buttons down, this will
make it scroll too fast.
2. Press the CALL button. This will call the resident's phone.
3. When the resident answers, identify yourself.
4. If the resident knows you, they will press 5 on their phone.
5. When the resident hears a high pitched tone, they will hang up.
6. The gates will open and the visitor may proceed through the gate.
Note: The gates close automatically when the vehicle
clears the gate area
|